PFP-11hpHND-M

Image

HONDA POWERED PUMP

This light weight Honda powered pump is the most powerful on the market in its category. You get the highest volume in its range. Engine and pump are mounted on a protective frame made of steek with shock absorbers and folding handles

 

ENGINE SPECIFICATIONS

  • Honda 11hp at 3600 RPM, air cooled engine
  • Single cylinder gasoline engine
  • Manual recoil start
  • 6 quarts (6.5L) integrated fuel tank

PUMP UNIT SPECIFICATIONS

  • Direct drive C.E.T single stage centrifugal pump
  • Pump body made from resistant aluminium alloy
  • Bronze impeller
  • Mechanical shaft seal
  • Exhaust priming system, guaranteed up to 20′ (6m) lift
  • One 2 1/2″ (65mm) delivery outlet with 1/4-turn ball valve
  • One 2 1/2″ (65mm) suction inlet
  • Dimensions: Length: 23 1/4″ (590mm); Width: 22 3/8″ (568mm); Height: 23 5/8″ (600mm)
  • Weight :115 lbs (52kg)

PFP-11hp-HND-EM-HP

Image

 

HONDA POWERED PUMP

High pressure Honda powered pump that goes up to 205 psi. Engine and pump are mounted on a protective frame made of steel with shock absorber and folding handles

ENGINE SPECIFICATIONS

  • Honda 11hp at 3600 RPM, air cooled engine
  • Single cylinder gasoline engine
  • 12V electric start with recoil start as back up
  • 6 quarts (6.5L) integrated fuel tank

PUMP UNIT SPECIFICATIONS

  • Transmission drive C.E.T single stage centrifugal pump
  • Pump body made from resistant aluminium alloy
  • Bronze impeller
  • Mechanical shaft seal
  • Stainless steel pump shaft
  • Exhaust priming system, guaranteed up to 15′ (4.5m) lift
  • One 1 1/2″ (38mm) delivery outlet with 1/4-turn ball valve
  • One 2 1/2″ (65mm) suction inlet
  • Dimensions: Length: 24″ (609mm); Width: 26 3/4″ (679mm); Height: 23 7/8″ (606mm)
  • Weight :160 lbs (73kg)

PFP-26hp-DSL-MR

Image

 

DIESEL POWERED PUMP

The MR version gives you more pressure to meet the requirements of an initial attack.

MR = mid range

 

ENGINE SPECIFICATIONS

  • Vanguard 26hp at 3600 RPM, water cooled engine
  • 3-cylinder diesel engine
  • Electric start
  • 6 gallon (22L) detachable fuel tank

 

PUMP UNIG SPECIFICATIONS

  • C.E.T single stage centrifugal pump
  • Pump body made from high resistance aluminium alloy
  • Bronze impellers
  • Mechanical shaft seal
  • Stainless steel pump shaft
  • Electric priming system, guaranteed up to 20′ (6 metre) lift
  • One 1 1/2″ (38 mm) delivery outlets
  • One 2 1/2″ (65mm) suction inlet
  • Dimensions : Length : 32″ (813mm); Width : 24″ (610mm); Height : 27″ (686mm)
  • Weight : 265 lbs (120kg)

 

CONTROL PANEL

  • Engine start/stop button
  • Throttle control lever
  • Operating panel light
  • Pilot lights
  • Pressure gauge
  • Vacuum pressure gauge

 

PFP-21hp-DSL-MR

Image

DIESEL POWERED PUMP

The MR version gives you more pressure to meet the requirements of an initial attack

MR = Mid Range

ENGINE SPECIFICATIONS

  • Kubota developing 21hp at 3600 RPM, water cooled engine
  • 3 cylinder diesel engine
  • 12V Electric start

PUMP UNIT SPECIFICATIONS

  • C.E.T single stage centrifugal pump
  • Pump Body made from salt water resistant aluminium alloy
  • Bronze impeller
  • Steel pump shaft
  • Mechanical shaft seal
  • Stainless steel pump shaft
  • Exhaust priming system, guaranteed up to 15′ (4,6 meter) lift
  • One 1 1/2″ (38mm) delivery outlet
  • One 2 1/2″ (65mm) suction inlet
  • Dimensions : Length : 32″ (812mm); Width : 22″ (559mm); Height : 27″ (685mm)
  • Weight : 290 lbs (130kg)

Glider Kit

Image

 

CET offers quality and value with a unique Glider Kit program. Brush truck to Quick-Attack

Engineered, manufactured and assembled for your convenience. A Glider Kit is composed of a CET drop-in, CET polypropylene heavy duty compartments and a CET custom heavy duty Fire Application flatbed

GLIDER KIT COMPONENTS :

  • CET drop-in units are built with many standard features and a wide range of options
  • CET light weight aluminium flat bed body, including the following unique features :
    • Flat Bed perimeter made from forged 3003-H14 aluminium, for unmatched strength to weight characteristic
    • Perimeter made to embed emergency lighting & designed to fit reflective stripping
    • Integrated on the left or right side of the flat bed body, CET offers an exclusive all enclosed pre-connect hose tray made from aluminium to hold up 250′ of 1-3/4″ hose
  • Wide variety of cabinets, doors, trays (sliding or fixed) made from high impact polypropylene or rigid aluminium sheet
  • NFPA and DOT compliant where applicable

PDW-300

Image

The 300 DE-WATERING is a compact design pump that gives you a range of applications.

TECHNICAL SPECIFICATIONS

  • Engine : C.E.T 5.5hp at 3600 rpm
  • Starting System : Manual Recoil
  • Fuel Tank Size : 1/2 gallon
  • Priming System : Self Priming System
  • Seal : Mechanical Seal
  • Pump : Single Stage
  • Inlet Connection : 3″ male NPT
  • Outlet Connection : 3″ male NPT
  • Dimensions : 21″ L x 17″ W x 18″ H
  • Weight : 64lbs
  • Pump Capacity : 275 gals / min

PFP-6hpHND-M-TWIN

Image

HONDA POWERED PUMP

The Goliath model is a compact pump that delivers amazing pressure performance so as to meet the needs of several applications.

ENGINE SPECIFICATIONS

  • Honda 6.5hp at 3600 RPM GX200, air cooled engine
  • Single cylinder gasoline engine
  • Manual recoil start
  • 1.5 gallon (5.7L) integrated fuel tank

PUMP UNIT SPECIFICATIONS

  • C.E.T dual stage centrifugal pump
  • Pump body made from aluminium
  • Aluminium impeller
  • Mechanical shaft seal
  • Self priming system
  • Two 1″ (25mm) delivery outlets and one 1 1/2″ (38mm) NPSH delivery outlet
  • One 1 1/2″ (38mm) NPSH suction inlet
  • Dimensions (approx): Length: 19″ (483mm); Width: 17″ (406mm); Height: 16″ (381mm)
  • Weight (approx): 59lbs (27kg)

INCLUDED ACCESSORIES

  • Low oil alert

PFP-9hp-DSL

Image

 

ENGINE SPECIFICATIONS

  • Yanmar 9hp at 3600 RPM, air cooled engine
  • Single cylinder diesel engine
  • 12V electric start with recoil start as backup
  • 1.45 gallons (5.5L) integrated fuel tank

 

PUMP UNIT SPECIFICATIONS

  • Direct drive C.E.T single stage centrifugal pump
  • Pump Body made from resistant aluminium alloy
  • Bronze impeller
  • Mechanical shaft seal
  • Exhaust priming system, guaranteed up to 20′ (6 meter) lift
  • One 2 1/2″ (65mm) delivery outlet with 1/4 turn ball valve
  • One 3″ (77mm) suction inlet
  • Dimensions : Lengthe : 20 1/2 (520mm); Width : 25 7/8″ (657mm); Height : 24 5/8″ (625mm)
  • Weight : 190 lbs (86kg)

PFP-30hpKHL-2D

Image

 

HIGH VOLUME PUMP

This pump is the ideal tool to fill your fire truck, supply your pump truck or carry water over a long distance.

 

ENGINE SPECIFICATIONS

  • Kohler 30hp at 3600 RPM, air cooled engine
  • V-Twin cylinder gasoline engine
  • Electric start
  • 6 gallon (22L) detachable fuel tank

 

PUMP UNIT SPECIFICATIONS

  • C.E.T single stage centrifugal pump
  • Pump body made from high resistance aluminium alloy
  • Bronze impeller
  • Mechanical shaft seal
  • Exhaust priming system, guaranteed up to 20′ (6 metre) lift
  • Two 2 1/2″ (65mm) delivery outlets with 1/4-turn ball valve
  • One 4″ (100mm) suction inlet
  • Dimensions: Length 24 3/4″ (628mm); Width: 21 5/8″ (549mm); Height: 23″ (600mm)
  • Weight : 198 lbs (89kg)

 

INCLUDED ACCESSORIES

  • Swivel spotlight
  • 180 watts alternator
  • Pressure gauge
  • 12-V battery

 

 

PFP-31hp-2D

Image

 

GAS POWERED PUMP

This high pressure/high volume pump is made to fight fire or supply water  to the fire scene. Engine and pump are mounted on a chassis made of profile steel with shock absorbers and 4 heavy duty carrying handles.

 

ENGINE SPECIFICATIONS

  • Vanguard 31hp at 3600 RPM, water cooled engine
  • 3-cylinder, 4 stroke gasoline engine
  • 12V electric start
  • 6 gallon (22L) capacity fuel tank

 

PUMP UNIT SPECIFICATIONS

  • C.E.T is using the new technology for a dual stage centrifugal pump
  • Pump body made from high resistance aluminium alloy
  • Bronze impeller
  • Mechanical shaft seal
  • Stainless steel pump shaft
  • Electric priming system, guaranteed up to 20′ (6 metre) lift
  • Two 2 1/2″ (65mm) delivery outlets
  • One 4″ (100mm) suction inlet
  • Dimensions: Length 40 1/4″ (1022mm); Width: 23 1/2″ (596mm); Height: 26 5/8″ (676mm)
  • Weight : 295 lbs (134kg)

 

INCLUDED ACCESSORIES

  • Engine starts/stop button
  • Throttle control lever
  • Choke control lever
  • Oil control lamp
  • Operating panel light
  • Pressure gauge
  • Vacuum pressure gauge